Spare Parts

Automatic Drain Valve

Automatic drains take condensate out of receivers, filters and dryers without an operator having to remember. Four types are supplied: receiver drains, electronic timer drains, and drains built into or fitted to line filters.

TypesReceiver / timer / filter
ActionAutomatic
Installed onReceiver, filter, dryer
Automatic drain valve for an air receiver tank

Overview

The four types

Receiver and tank drains

Cycle out the water that collects at the bottom of the air receiver, so it does not carry over into the plant or sit against the vessel wall.

Electronic timer drains

A solenoid valve driven by an adjustable timer. On and off times are set to the condensate load rather than left at a default.

Filter-mounted drains

Internal and external versions for line filters, where condensate would otherwise sit in the bowl against the element and re-entrain into the air stream.

Product range

Drain types

Shown as supplied. Dimensions, port sizes and mounting differ between models — confirm the compressor model or serial number and we will identify the matching variant.

Selection notes

Before you order

Specifications

General specification

ParameterDescription
FunctionRemoves condensate from receivers, filters and dryers automatically
TypesReceiver / tank drain; electronic timer drain; filter internal drain; filter external drain
OperationAutomatic — timed cycle on the electronic type, float or timed action on tank drains
ConstructionValve body, solenoid or float mechanism, control timer on the electronic type
InstallationPort size, thread type and orientation vary by vessel or filter
MaintenanceCheck the strainer and cycle time; a drain that never closes wastes air
FitmentConfirm port size and thread against the receiver, filter or dryer

Two failure modes cost money in opposite directions: a drain stuck shut floods the downstream air with condensate, and a drain stuck open wastes compressed air continuously. Check the strainer and the cycle setting at every service. Match the port size and thread to the vessel before ordering.

Next step

Get a parts quotation

Send us the machine model or serial number and the quantities you need. Components ship from our Guangzhou plant, and samples are available for evaluation.

Phone / WhatsApp+86 189 2615 8887
FactoryNo. 31 Shixin Road, Shajiao Village, Zengcheng District, Guangzhou, China