Spare Parts
Desiccant Air Dryer
Twin-tower heatless desiccant dryers for duties that need air drier than a refrigerated dryer can deliver. The two desiccant beds alternate between drying and regeneration, so supply is continuous.

Overview
How heatless drying works
Twin desiccant beds
While one tower dries the incoming air, the other is regenerated. The beds swap on a timed cycle, so there is no interruption to the air supply.
Pressure-swing regeneration
A proportion of already-dried air is expanded and passed back through the offline bed to drive off the moisture it collected. No external heat source is needed.
Dew point
Delivers a pressure dew point well below what refrigeration can reach — typically around −40 °C, depending on configuration, inlet temperature and the regeneration air allowance.
Product range
Dryer unit

Shown as supplied. Dimensions, port sizes and mounting differ between models — confirm the compressor model or serial number and we will identify the matching variant.
Selection notes
Before you order

Specifications
General specification
| Parameter | Description |
|---|---|
| Function | Removes water vapour from compressed air to a very low pressure dew point |
| Type | Heatless (pressure-swing) twin-tower desiccant dryer |
| Construction | Two desiccant-filled towers, switching valves, control timer and exhaust silencer |
| Regeneration | Uses a proportion of the dried air — no external heat required |
| Dew point | Typically around −40 °C pressure dew point, depending on configuration |
| Inlet conditions | Inlet temperature and moisture load affect achievable dew point |
| Pre-filtration | A coalescing filter upstream is required to stop oil reaching the desiccant |
| Fitment | Sized to air flow, working pressure and required dew point — confirm before ordering |
Desiccant dryers are sized on air flow, working pressure and the dew point actually required — specifying on flow alone is the usual reason a unit under-performs. A coalescing pre-filter is essential: oil that reaches the desiccant bed cannot be regenerated out and the charge has to be replaced. For dryers integrated into a laser-cutting package, see the Ares-XF series.
Next step
Get a parts quotation
Send us the machine model or serial number and the quantities you need. Components ship from our Guangzhou plant, and samples are available for evaluation.
