Nitrogen Generation

Laser Welding Nitrogen Generator

A five-in-one PSA nitrogen system built for laser welding lines. Nitrogen produced on site from compressed air protects the weld pool from oxidation, giving clean, bright seams instead of scaled or discoloured ones.

TechnologyPSA · molecular sieve
MonitoringReal-time purity
DesignFive-in-one cabinet
Laser Welding Nitrogen Generator

Overview

Why nitrogen in laser welding

Nitrogen used as the assist gas displaces oxygen from the weld pool. That single change removes most of the rework that comes from oxidation — the metal surface stays clean, the weld penetrates properly and the seam needs far less finishing.

Cleaner weld pool

Oxidation of the metal surface during cutting and welding is strongly reduced.

Faster welding

Higher welding speed means more parts per shift at the same quality level.

No scaling or discoloration

Less post-weld cleaning, less rework and a more stable, repeatable result.

High purity

Carbon molecular sieve separation with continuous purity monitoring on the display.

Automatic operation

Unattended cycling of the adsorption towers — no operator intervention in normal running.

Works with dust extraction

Paired with fume extraction, it materially improves the working environment at the cell.

Product gallery

Machine detail

Specifications

Key parameters

ParameterDescription
Nitrogen generation methodPSA (pressure swing adsorption) with carbon molecular sieve, twin adsorption towers on an alternating cycle
Feed air requirementClean, dry compressed air at stable pressure — an air treatment train (dryer and precision filtration) is supplied as part of the set
Purity monitoringContinuous real-time purity display on the control panel
ControlAutomatic PLC control with solenoid valve sequencing; unattended operation
InstrumentationPrecision pressure gauges, precision filter, solenoid valves
ConfigurationFive-in-one integrated cabinet — generation, air treatment and controls supplied as one matched package
Purity / flow / dew pointSpecified per project — sized to your laser power and required assist-gas condition

Purity, flow rate and dew point are configuration-dependent. Please tell us the material and thickness you weld, your laser power and the required nitrogen purity, and we will confirm the exact model and performance figures in writing before you order. Not all products shown on this site are covered by the CE certificate that applies to our screw air compressor range — certification status is confirmed per model on request.

Applications

Materials and processes

Suitable for laser welding and laser cutting of the common sheet and section materials:

  • Aluminium
  • Stainless steel
  • Hot-rolled steel
  • Carbon steel
  • Titanium alloy
  • Galvanised tube
  • Channel steel
  • Welded steel pipe
  • Colour steel plate

Also used wherever a dry, inert assist gas improves weld appearance — stainless fabrication, HVAC ducting, kitchen equipment, architectural metalwork and general sheet-metal production.

Construction

Built around the key components

Incoming air is conditioned before it reaches the sieve bed, so the molecular sieve keeps its capacity for its full service life.

Next step

Size a generator for your welding cell

Send us your material, thickness, laser power and required purity — we will come back with a model recommendation, an air-treatment match and a quotation.

Phone / WhatsApp+86 189 2615 8887
FactoryNo. 31 Shixin Road, Shajiao Village, Zengcheng District, Guangzhou, China